|
Wuxi Caifeng company carefully developed and continuously improved from the classic products. Curved elbow type (180T-600T) Two-plate type (850T-1950T)
Product details
Off mold (Two-plate type)
★ Large space inside the column and extra-long opening stroke are suitable for producing large or deep cavity products.
★ Precise design of the clamping unit reduces the installation area by 25%.
★ Four clamping cylinders with equal force to reduce the shrinkage and deformation of product.
★ The clamping unit designed by 3D dynamic simulation and combined with CAE analysis ensures the normalization of clamping.
★ Turntable servo drive.
★ Safety sensing grating to ensure personal safety.
Off mold (Bent elbow type)
★ The inner pitch of the tie rod is designed with a wide pitch, which has a large mold capacity.
★ The mold wall strength reinforcement design can prevent excessive deformation and ensure the quality of the injected products.
★ The diameter of the tie rod is enlarged and the elastic type design prevents breakage.
★ Mechanical turntable positioning to ensure accurate positioning.
★ The turntable has a parallel thrust mechanism, and the turntable does not fall down.
★ The servo turntable pushing mechanism is fast and stable in operation.
★ Long-lasting lubrication crank hand, can save lubricant oil consumption by 30%.
Ejection
★ Adopt high rigidity linear slide rail to achieve low resistance of the injection sliding part, ensuring injection stability and long-lasting durability.
★ High-speed response time within 0.1sec and repeatability within 0.1% ensure injection accuracy.
★ Interchangeable injection structure, front and rear injection can be matched at will. Abundant experience to adjust according to customer's capacity demand.
★ Excellent material tube screw set, professionally designed and formally executed heat treatment, high wear resistance, shortening the melting time in high torque and high speed material storage operation.
★ Single cylinder injection, the injection piston rod does not rotate when storing material. High injection effect and good stability.
Hydraulic components
|
|
|
|
|
Sumitomo Oil pumps
|
ingdong meter Solenoid valve
|
Electrical components
|
|
|
|
|
|
|
|
Pillz Safety Relays
|
Gefran Pressure Sensors
|
GEFRAN Electronic ruler
|
Schmersal Edge switches
|
Oil pressure
Electrical box
The shield wire is centrally grounded for good anti-interference performance.
The strong and weak electricity are arranged in separate cabinets to effectively eliminate electromagnetic interference.
Servo power system
|
|
Highly responsive servo power system ensures precise control
|
★ The servo motor pump has a response time of 0.1 seconds for flow and pressure rise or fall, providing high responsiveness compared to conventional proportional valve systems.
★ Servo motor pump when the flow pressure rises, the motor runs forward at high speed to control the flow and pressure, and when the pressure drops, the motor runs in reverse to reduce the load.
Control computer
keba computer
|
Dizhou computer
|
|
|
|
|
|
|
High precision control (optional)
|
Simple operation, Full function, Many service outlets
|
|
|
|
|
Two-board two-color machine Machine frame
The rigidity of the frame is strong and not easy to deform; the structure design is reasonable and the construction is rigorous to clear the stress and reduce the amount of deformation, which has ensured the accuracy of machine operation and product repeatability.
Two-plate two-color machine Piping
Optimized hydraulic design with 3D software, less bends, less welding, close proximity and very small pipe resistance.
All hydraulic valve blocks are above the tank level for easy maintenance.
Curved elbow type two-color machine Machine frame
The rigidity of the frame is strong and not easy to deform; the structure design is reasonable and the construction is rigorous to clear the stress and reduce the amount of deformation, which has ensured the accuracy of machine operation and product repeatability.
Curved elbow type two-color machine Piping
Optimized hydraulic design with 3D software, less bends, less welding, close proximity and very small pipe resistance.
All hydraulic valve blocks are above the tank level for easy maintenance.
Technical specifications and certification
Equipment designed and manufactured under the standards of ISO 9001;
Equipment in compliance with GB22530 safety standards;
Equipment in accordance with the industry standard for plastic machinery;
Energy efficiency of equipment to meet national level energy consumption standards;
Machine appearance
300 Tons
850 Tons
|
