CHINESE| ENGLISH Hello, welcome to the website of "Wuxi Caifeng Machinery Co., Ltd."!
International Sales Hotline:+86 510-87210909Fax:+86 510-87212680


Support hotline:+86 510-87210909

Wuxi Caifeng Machinery Co., Ltd.

International Sales Hotline:
+86 510-87210909

Fax:+86 510-87212680

Address: No.588, Donghong Road, Guanlin Town, Yixing City, Jiangsu Province

Website:www.wxcaifeng.com


Current location: Home >> News >> Company News

Two plates and two colors—CF-850BDC

Release date: 2021-03-25 16:06:46 Visits: 356


Feature of product:
1. The design of the turntable adopts the external gear type, and the rotation and positioning are fast and accurate.
2. The drive of the turntable adopts a servo motor system, which makes the performance more stable.
3. Two independent servo power systems are adopted to maximize the use of drive functions, which are efficient, energy-saving, stable and accurate.
4. Equipped with cooling water device to avoid entanglement of water pipes during transfer and rotation.
5. Two groups of independent injection units adopt low resistance, high-precision linear guides, multi-modular, and different injection units can be arbitrarily matched.

Molding features:
1. The split mold is closed, the force surface of the mold is average, the force of the two molds is parallel to the double internal test, and the inside of the molded part is injected uniformly, and the product appearance + size is relatively stable.
2. The precision requirements of the two-platen machine are high. The split mold and racking method are different from the general curved mobile phone racking method. The two-platen machine is produced for a long time when the split mold is installed. The absence of two pairs of mold guide posts will cause the mold to be roughed and the mold will not be closed. Smooth matters.
3. The automatic mold adjustment function is simple and fast, with a small footprint, large mold opening spacing, and no concerns about crankshaft loss and maintenance. The mold clamping part of the whole machine has no oil stains and oil stains on the surface, which improves the environmental protection environment of the workshop.

Clamping unit:
1. Large space in the column and long mold opening stroke.
2. The precise design of the clamping unit reduces the installation area by 25%.
3. Four hydraulic cylinders with even output of the mold can reduce the shrinkage and deformation of the product.
4. High-pressure mold clamping and decompression are fast, and the clamping pressure is controlled accurately, and it can be used for compression molding with the mold.
5. Adopting 3D dynamic simulation design combined with the clamping unit of CAE analysis to ensure the optimization of clamping.
6. By fully retracting all four large columns, it is possible to insert a super large, large-volume mold, and no additional connecting rod pulling device is required.
7. Free space, suspension and short pull rods do not need lubrication to keep the machine clean.

Injection unit:
1. Adopt high-rigidity advance slide rail, inject the low resistance of the sliding part in advance.
2. The notification response time within 0.1 seconds and the repeatability within 0.1% ensure injection accuracy.
3. The screen sets the proportional valve to control the back pressure to realize highly accurate production.
4. Adopt high torque hydraulic motor to realize full plasticization of all kinds of plastics.
5. The injection adopts double cylinders for parallel injection, stable injection and precise positioning.
6. Due to the compact design of the 2 template module and the CF injection unit, the size is significantly reduced, and the machine occupies a smaller area. Therefore, compared with the traditional machine tool, its footprint is reduced by 20-30%.

Hydraulic unit:
1. The safety door with full servo control is fast, stable and reliable.
2. Fast and stable automatic mold adjustment, which can save mold replacement time.
3. Servo hydraulic drive system is used to reduce energy.
4. The hydraulic system adopts a logical and centralized design, which makes the response more agile.

Computer:
1. Use the WEB platform to use network resources in multiple ways.
2. Support multi-language, WEB screen layout, color rendering, external pictures.
3. Transplant across the platform height without boundaries.
4. Support remote monitoring.
5. The separate design of display and touch screen reduces maintenance costs.